Procedure

To access the System Functions, start up the controller with FUNC button pressed.pulsante_6x6.jpg FUNC

The QMOVE application, if present, it not executed and the led L1 lights up.

Use the FUNC button pulsante_6x6.jpg to scroll through the functions.
The selected function is indicated by the combination of L1-L2-L3-L4 leds lighted up.

The “System Functions” table gives the list of system functions and related led combinations.

Press the BOOT button for 2 seconds to execute the selected function.pulsante_6x6.jpgBOOT

The POW led starts flashing to indicate taht the selected function is being executed.led_lamp.jpgPOW

When the function ends the POW led stops flashing. led_on.jpg POW

If the function does not complete properly the POW stops and the ERR starts flashing

The number of flashes indicates the type of error as shown in the table System Function Error Messages.